| -Dr REBUILD's Corvette 63-67 A.C. Seal Kits | |||
| All of these parts, plus the detailed instruction sheets were developed from patterns and original parts from-Dr REBUILD's own 67 AC Coupe. We Don't make Repros from Repros. | |||
| 63-67 | Includes | Part # | |
| Includes 20 die cut rubber seals, 1 fiber seal and 2 putty seals for the evaporator core, case, adaptor box & core cover. | |||
| ABCDEFGHIJKLMNOPQRS |
|
8846120 | |
| ABCDEFGHIJKLMNOPQRS with PSA on DEJKLMQRS |
|
8846119 | |
| Includes 11 die cut rubber seals, 1 seal with PSA, 4 felt seals, 2 putty seals & 1 polyfoam seal for the distributor box, vent door, cold air duct, upper & lower ducts & LH & RH dash ducts. | |||
| ABCDEFGHIJKLMNO |
|
8846121 | |
| ABCDEFGHIJKLMNO with PSA on FGHI |
|
8846122 | |
| 63-67 A.C. Individual OUTER Firewall SEALS... | ||
| Description | Part # | |
| A | 8846126 | |
| B | HEATER CORE COVER PLATE to FIREWALL SEAL |
8846132 |
| C | AC ADAPTER BOX to FIREWALL SEAL |
8844127 |
| D | ADAPTOR BOX INNER VENT DOOR SEAL |
8846135 |
| E | ADAPTOR BOX OUTER VENT DOOR SEAL |
8858130 |
| F | ADAPTOR BOX OUTLET SEAL |
8846129 |
| G | BLOWER MOTOR CASE to EVAP CASE SEAL |
8844134 |
| H | BLOWER MOTOR CASE INNER or OUTER SEALS, 2 reqd |
8846140 |
| I | BLOWER MOTOR RESISTOR to EVAP CASE SEAL |
8858139 |
| J | RH INTERNAL EVAP CASE OUTBOARD SEAL |
8858141 |
| K | RH INTERNAL EVAP CASE FLOOR SEAL |
8846144 |
| L | RH INTERNAL EVAP CASE REAR LOWER SEAL |
8844143 |
| M | RH INTERNAL EVAP CASE REAR UPPER SEAL |
8846142 |
| LH EVAP CASE CORE PIPE SEALS, Pair. A good die cut sponge rubber replacement, similar to those on 68-82 models | ||
| O | EVAP CORE MOUNTING HORIZONTAL SEALS, Pair |
8844145 |
| P | EVAP CORE MOUNTING VERTICAL SEALS, Pair |
8846146 |
| Q | LH INTERNAL EVAP CASE INBOARD SEAL |
8844147 |
| R | LH INTERNAL EVAP CASE UPPER SEAL |
8846148 |
| S | LH INTERNAL EVAP CASE LOWER SEAL |
8844149 |
We discontinued the 11 piece AC Heater Box Seal Kit that was offered in our older catalogs. That kit was NOT complete, and did NOT contain all the seals needed to restore either the inner or outer boxes or the ducts. We have replaced that kit with two separate kits: one for the outer boxes on this page & one for the inner boxes & ducts on the next page -- and they contain every seal ever used.
| 63-67 A.C. Individual OUTER Firewall SEALS... | ||
| Description | Part # | |
| A | DISTRIBUTOR BOX to INNER FIREWALL SEAL |
8846160 |
| B | HEATER CORE to SUPPORT PLATE SEAL |
8846161 |
| C | COLD AIR DUCT OUTLET to DISTRIBUTOR STRIP SEAL |
8844162 |
| D | COLD AIR DUCT END to DISTRIBUTOR PUTTY SEAL |
8846163 |
| E | DISTRIBUTOR BOX REAR COVER SEAL |
8858164 |
| F | DISTRIBUTOR BOX REAR DUCT SEAL |
8846165 |
| K | LEFT VENT DOOR SEAL |
8846174 |
| L | CENTER DASH UPPER DUCT to DASH SEAL |
8844170 |
| M | LOWER CENTER DUCT SEAL to COLD AIR DUCT |
8846173 |
| RH DASH DUCT MOUNTING CLAMP SEAL | 8858172 | |
| O | DASH DEFLECTOR BALL SEAL 4 PIECE SET |
8844171 |
| G | DISTRIBUTOR BOX FRONT DUCT SEAL |
8844166 |
| H | HOT AIR DOOR INNER & OUTER SEALS, Pair |
8846167 |
| I | COLD AIR DOOR INNER & OUTER SEALS, Pair |
8858168 |
| J | DEFROSTER DOOR SEAL |
8858169 |